湖南彩票|湖南彩票官网下载
當前位置: 首頁 > 微軟應用 > 系統工具 > 正文
微星顯卡超頻工具 MSI Afterburner 4.6.0 Final 中文免費版

微星顯卡超頻工具 MSI Afterburner 4.6.0 Final 中文免費版

作者:大眼仔~旭 日期:5個月前 (03-07) 圍觀:35099+ 評論:1 條

摘要:微星顯卡超頻工具 MSI Afterburner 4.6.0 Final 中文免費版由大眼仔旭(www.3x6.com.cn)發布。游戲玩家大多都不會對Fraps陌生,而今天要介紹的?MSI Afterburner 中文版?則是微星出品的一款顯卡工具。但 AfterBurner 卻并沒有將它限制于自家顯卡,而是所有顯…

微星顯卡超頻工具 MSI Afterburner 4.6.0 Final 中文免費版由大眼仔旭(www.3x6.com.cn)發布。游戲玩家大多都不會對Fraps陌生,而今天要介紹的?MSI Afterburner 中文版?則是微星出品的一款顯卡工具。但 AfterBurner 卻并沒有將它限制于自家顯卡,而是所有顯卡都支持。通過一段時間的試用,reizhi認為AfterBurner作為fraps的替代品表現十分出色。

微星顯卡超頻工具 MSI Afterburner 中文版

微星顯卡超頻工具 MSI Afterburner 中文版

MSI Afterburner 功能介紹:

1.顯卡超頻
打開AfterBurner主界面之后,顯卡當前工作狀態詳盡的展現在我們眼前。主界面左側為控制部分,可以對GPU電壓,核心頻率,顯存頻率和風扇轉速(需硬件支持)等進行實時調節。而右邊部分則是監控部分,可以實時顯示核心頻率,GPU溫度,顯存占用率等。

2.視頻攝錄
其實AfterBurner是有視頻攝錄的,在主界面點擊settings即可看到相關的設置。軟件提供了包括原始流在內的三種格式,適合不同要求及不同配置。經過實際測試,RTV1格式不僅壓縮速度快,而且質量較高。可以代替fraps作為游戲錄制軟件使用。

在打開AfterBurner后,顯卡監控模塊就會自動自后臺運行,當檢測到3D程序運行時就會在屏幕上顯示出相應的信息。這一點與fraps相似,但比起frpas更加強大。如下圖,AfterBurner不僅可以顯示幀率,更能提供溫度、GPU使用率、顯存使用量等信息。甚至可以在設置中顯示當前時間,對于全屏玩游戲的朋友而言不用再切回桌面看時間了。

綜上所述,AfterBurner在顯卡調校方面不遜于Rivatuner,顯卡監控和視屏攝錄上也完全不在frpas之下。如果你是fraps的忠實用戶,又何不試試這款微星出品的免費軟件呢?

官方主頁

MSI Afterburner 4.6.0 更新日志
Includes full RVII support, including overclocking (which was missing in the previous early b15 build).
Now you can use <Tab> and <Shift>+<Tab> keys to select next/previous point on the curve. This feature is useful for those who prefer to use keyboard <Up>/<Down> keys to fine-tune selected point frequency offset instead of adjusting the point with mouse cursor. I’m not sure if many of you know that, but I’ll remind that you can also hold <Ctrl> while fine-tuning frequency offset with <Up>/<Down> keys to jump to the nearest frequency value rounded to 10MHz
Now you can press <Enter> key to edit selected point frequency offset from keyboard. Alternately you may press <Shift>+<Enter> to specify absolute target frequency value, so the editor will calculate desired offset automatically
Slightly changed keyboard control interface for AMD implementation of V/F curve editor. Previously you could select P-State and fine-tune frequency with <Up>/<Down> or <Ctrl>+<Up>/<Ctrl>+<Down> keys or fine-tune voltage <Left>/<Right> or <Ctrl>+<Left>/<Ctrl>+<Right> keys. Now both frequency and voltage are adjusted with <Up>/<Down> or <Ctrl>+<Up>/<Ctrl>+<Down> keys and voltage or frequency keyboard input focus is selected with <PageUp> / <PageDown> keys. Voltage or frequency keyboard input focus is now highlighted by selected point brightness on the curve. Keyboard input focus also affects new <Enter> / <Shift> + <Enter> functionality, allowing you to type in target voltage or frequency in both offset or absolute form
Similar to NVIDIA implementation, now you may also hold <Alt> when dragging V/F curve point on AMD systems. This will result in moving whole curve up/down while preserving each point’s offset
Added undo/redo support to voltage/frequency curve editor:
Now voltage/frequency curve editor is saving up to 1024 last states of the curve during editing and allows you to undo/redo changes with <Ctrl>+<Z> or <Ctrl>+<Y> / <Ctrl>+<Shift>+<Z> keys
Undo history is discarded when you apply the curve, forcibly reread it from hardware with <F5> key or switch to different GPU on multi-GPU system
Number of recorded undo/redo steps is displayed in square brackets in the editor window caption
Application properties dialog window is now displayed with topmost style when the properties are activated from detached monitoring window and “Always on top” mode is enabled for it
NVIDIA Scanner components are updated to latest version, NVML.dll issue should be addressed now

資源:1674.rar
解壓密碼:www.3x6.com.cn
轉載請保留出處,謝謝合作~
點擊下載
點擊下載(提取碼:e4v1)
點擊下載
點擊下載(提取碼:y86p)

聲明:大眼仔旭 | 本文采用[BY-NC-SA]協議進行授權
文章名稱:《微星顯卡超頻工具 MSI Afterburner 4.6.0 Final 中文免費版
文章固定鏈接:http://www.3x6.com.cn/msi-afterburner.html
本站資源僅供個人學習交流,請于下載后 24 小時內刪除,不允許用于商業用途,否則法律問題自行承擔。
轉載聲明
全部評論: (1條)
  1. 灰煙飛2015-12-08 10:32 回復
    為何下載下來依然是411?

發表評論

返回頂部
湖南彩票